BOAT RESCUE PART 9: THE FUN CONTINUES

Previous Post: BOAT RESCUE PART 8: FIRE IN THE HOLD .... well, in the garage anyway

The last few weeks many projects have been started, but nothing is getting finished as I source, order, and wait for parts I think I need ... only to discover by the time they arrive I've had a better idea and need to re-order!

First on the list was to get the engine into the boat. This was easy: just pull the trailer out of the shed, hoist the engine up to the shed rafters (on a reinforced arch), back the boat into the shed, and lower the engine down.

Yanmar dangling over the cockpit.

This was as good a time as any to refurbish the engine beds. When a P.O. (previous owner) had the Volvo-to-Yanmar conversion done some wooden shims were used to get the correct engine height. This served well for the time it was used but, having the luxury of unlimited time, a more permanent set of shims was made from 1/2" aluminum plate, and the mounts re-drilled, re-tapped, and installed.


Engine beds installed.