Sunday, December 4, 2011

BOAT RESCUE PART 6: INTERIOR REBUILD CONTINUES, ENGINE EXAMINED..

PREVIOUS: BOAT RESCUE PART 5: INTERIOR REBUILD STARTS.
(Please click on any picture for enlargement).

The interior woodwork has all been fitted, ready for removal, sanding, staining, and varnish varnish varnish!

Galley and Steps on Engine Cover.

You can never have too many clamps!

V-Berth.

Monday, October 10, 2011

BOAT RESCUE PART 5: INTERIOR REBUILD STARTS.

Previous: BOAT RESCUE PART 4: LET THE RESTORATION BEGIN

As you can see by the picture below, Bennath's hull is now free of all the old bottom paint, and since the photo was taken she has lost the blue beltline stripe as well.
Naked hull.

Time to start the layout for new bulkhead panels. As I could not get 15mm plywood I used 3/4" instead ... a little heavier maybe, but one has to go with what's available.
Maximizing wood use.
One bulkhead was too large to get through the hatch, so it had to be cut in two. The new one was also made in two pieces, with a joint 12" in from the inboard edge. This allows the part that bolts to the hull flange to remain in one piece. The two will have to be joined inside the boat.

Main bulkhead joint with joiner strip. (Final strip used was plywood as the grain of the solid wood strip lacked strength.)

Thursday, August 18, 2011

BOAT RESCUE PART 4: LET THE RESTORATION BEGIN

(Previous: BOAT RESCUE PART 3: SO, WHAT DID I DRAG HOME?

The rescue of a 1976 Albin Ballad 30' sailboat

It's a relief to stop taking things off the boat and start some serious rebuilding work. One of the first jobs, after removing all the debris from the old ceilings, was to "de-glue" the hull sides. In places the old adhesive peeled off in sheets, partly due to the moist conditions in the boat. But most of it put up a good fight, and it took an assorted arsenal of tools to persuade it to let go.

Tool Arsenal
My main tools were a razor blade scraper, a wire brush, an old 1/2" chisel, gloves, and a kneeling pad. I found that if I kept the razor blade wet when scraping the glue did not re-stick to the fiberglass. Another useful tool was an abrasive pad, also kept wet. Even after it was all removed (two days work) little bits of rubbery glue were everywhere, trying their best to re-adhere to anything they came in contact with!


Wire Brush in Action
Working inside the bare hull was interesting: everything dropped immediately headed for the bilge, and unless I kept a grip on something I was apt to slide bilgeward also!

Most of the gear I removed was in decent shape. The winches, although dirty with debris, are in good working condition and should be fine after a good cleaning and lubrication.


Winch with Drum Removed.

Saturday, July 16, 2011

BOAT RESCUE PART 3: SO, WHAT DID I DRAG HOME?

(Previous: BOAT RESCUE PART 2: THE MOVE.)

The rescue of a 1976 Albin Ballad 30' sailboat.
Next step was to see just what I'd bought home. This involved emptying the contents of the boat, and stripping out the interior and mechanical systems. It's really fortunate the boat didn't fit in the shed, as I needed the covered space to store everything!

Lines

Thursday, July 7, 2011

BOAT RESCUE PART 2: THE MOVE.

(Previous BOAT RESCUE: THE DANGERS OF SEARCHING CRAIGSLIST.

The rescue of a 1976 Albin Ballad 30' sailboat.
Deciding to rescue a boat is one thing, but the reality of getting it home, where it can be worked on, is a whole different story!

After phoning several different boat movers to get a feel for what I was in for, I settled on Keel Hauling, a local company that had a smaller sized rig that might make it up my driveway. I liked owner Cam McLean's "can do" attitude, and his no BS approach to the project, so we arranged to do the deed on the following Saturday. As the boat was located on Gabriola Island this meant a ferry ride was part of the operation.
Cameron McLean and his rig

On arrival at the site we discovered the boat was sitting too low to be loaded easily, and we spent several hours jacking and blocking things until the trailer could be slid underneath.
Sliding the trailer under the hull.

11th ANNUAL PACIFIC NORTHWEST ALBIN VEGA RENDEZVOUS

(click on any image for a larger version)
This year's Pacific Northwest Rendezvous was held July 1st to 3rd at Deer Harbor Marina on beautiful Orcas Island, in the San Juan Island group, USA.

Our gracious and hard working hosts were VEGAtarians 
Sheila Gaquin and Howard Barbour, of Deer Harbor.
Thanks !!!!

Monday, June 27, 2011

BOAT RESCUE PART 1: THE DANGERS OF SEARCHING CRAIGSLIST.

(Click on pictures to enlarge.)
It seems I have become a two-boat owner again. While searching Craigslist the other day for boats for sale in this area an unbelievably 'cheap' boat showed up. Worse still, it was a make and model I have lusted after for a couple of years, an Albin Ballad. She's a 29' 11" cruiser/racer with fin keel and skeg-hung rudder with, in my eyes, drop-dead beautiful lines.

After initial inquiries, it turned out the boat had belonged to a sailor who had passed away a couple of years ago, and the boat had sat in the woods for five years. Yikes!! Before that she had been raced successfully in Vancouver, and had also made a return trip to Hawaii.

Still, I had to see her or I wouldn't sleep at night for wondering if she really was a real bargain. Arrangements were made to view, and we drove up to Nanaimo, caught the ferry across to Gabriola Island, and followed the directions that we'd been given.

Lo and behold, there she was parked on a muddy track, listing a bit to Starboard, covered with dead leaves and branches, and supported by many props, some looking pretty rotten.

Tuesday, June 21, 2011

The "BLACK FLY" Dinghy 8: Sailing Rig Details.

The Black Fly and my Eastport Pram share the same mast, boom, and sail. Originally for the Eastport Pram, the rig is a copy of the popular Sabot rig, which I much prefer to CLC's standing-lug design.


The Mast: is made from 1 1/2" 065 aluminum tubing. I cut mine in half to allow it to be stored in the forward cabin of the Vega. It's joined with a 12" piece of 1" aluminum pipe (1.3" OD, 0.125 wall thickness). The pipe is a loose fit in the mast tube, so a few wraps of electricl tape were used to fatten up the pipe to a nice friction fit. There is also a 36" length of tube, same size as the boom tube, inserted into the base of the mast to stiffen the lower section .... with more good old electrical tape!



The Boom: is made from 1 1/4" 065 aluminum tubing, with a laminated plywood jaw on the end that fits around the mast.









Thursday, March 24, 2011

BILGE PUMPS AND OIL SPILLS

Like a lot of boat owners I have an electric bilge pump with an automatic float switch lurking in the depths of the bilge, to insure against accidental sinking when the boat is unattended. Coupled to two deep cycle golf cart batteries, which are connected to two solar panels, that little pump should keep working until the cows come home.

However, I often feel concern over the fact that if my fuel tank leaks and floods the bilge with Diesel the float switch will come on and merrily pump 33 liters of fuel overboard into the marina. Having seen what a cupful of fuel does in the water, I shudder to think of a whole tank full!

A little research turned up a float switch that is operated by having two electrodes that complete a circuit when immersed in a conductive solution (salt water) but will not activate when submerged in Diesel oil. Water Witch is one of these. I like the way it straps right to the pump, as shown in the picture below.



The one downside I see is that pure rainwater (does such a thing exist?) will not activate the contacts. But as I have a conventional stuffing box and there is always a dram of salt water in the bilge I don't see this as a problem.

I think this would be a worthy upgrade ... one of those little things you never see or think about while on the boat, yet providing peace of mind when the boat is unattended. Needless to say, before I make a final purchase, the usual research will be done to make sure this product is a "best choice" for my application.

July 2011.
I have installed this switch and it works well .... very simple and effective. Contrary to some reports it does respond to fresh water as well as salt water.